Classic VIII
SM
Taking us back to the golden days of
traditional ‘bookshelf’ loudspeaker design, the
Vintage Classic VIII SM standmount model brings
all the nostalgic looks and rich performance of
the Vintage Classic Series to a compact and easy
to integrate loudspeaker. True to the series,
the rectangular cabinets are hand-finished with
walnut veneer and a deep black baffle, with gold
trim and ample design cues from the 1970s.
Alongside the 250mm (8”) IsoFlare driver, the
design incorporates a dedicated BassTrax porting
implementation designed to deliver the very best
performance from the 360 degrees LF wavefront
while mounted above the floor level on stands.
Vintage Classic VIII SM delivers simple,
beautiful, and classic looks with a truly
contemporary loudspeaker performance.
Specifications
- System Type : 2 way, downwards firing port,
with BassTrax Tractrix diffuser
- Recommended amplifier power (Watt RMS): 30 -
180
- Peak power handling (Watt): 360
- Continuous power handling (Watt RMS): 90
- Sensitivity (2.83 Volt @ 1m): 91dB
- Nominal impedance: 8 Ohm
- Frequency response (-6dB typical in room):
34Hz - 34kHz
- Drive unit complement: 1 x 200mm IsoFlare
point source driver, multi-fibre bass / midrange
cone,
FyneFlute surround with 25mm magnesium dome compression tweeter, ferrite
magnet system
- Crossover frequency: 1.8kHz
- Crossover type: Bi-wired passive low loss, 2nd
order low pass, 1st order high pass
- System adjustments High frequency energy:
(1.8kHz - 26kHz) +/- 3dB,
Presence (2.5kHz - 5.0kHz) +/- 3dB
- Dimensions - HxWxD: 540 x 330 x 294mm (21.3 x
13.0 x 11.6")
- Finishes: Walnut
- Cabinet Construction: High density fibreboard,
walnut veneered with extensive internal bracing
|